Industrial wood chipper

Industrial electric wood chipper

Introduction of industrial electric wood chipper :

Wood chips making by our industrial electric wood chipper is 20-30mm length and width. It is special chipping and crushing machine for raw wood of 50-150mm (diameter). The diameter of wood sawdust can reach to 2-5mm which is suitable for further pelletizing or briquetting.

Industrial wood chipper machine is a special equipment for the production of wood chips. It is widely used in the particleboard mill, high-density fiberboard factory,stubble plant,biomass power plant,wood chip plant and other industrial and production factories in the preparation section before preferred equipment.
Usage of industrial electric wood chipper .

Structure of industrial electric wood chipper

Structure of industrial electric wood chipper

Industrial electric wood chipper is composed of machine body ,knife chipping part,chips re-crushing and sieving part, etc. Industrial electric wood chipper combines both chipping and crushing equipment in one machine, can make sawdust in one passage, no need to use wood chipper for preprocessing of wood logs.

Industrial electric wood chipper can also equipment with hammer mill, which can using slice and blower to workas doble bleak. It can crush branches, roots, scraps etc. which are greater than 80mm. Through this machine, the sawdust are processed are greatly suitable for granulator or wood pellet mill for pelletizing.

Raw materials and final wood chipps

Raw materials of industrial electric wood chipper

All kinds of wood, timber, scraps , branches, wood chips edge materials, tree bark, bamboo and other raw materials into sawdust state.

Role of Wood Pellet Mill for Waste Recyc

Along with the strong appeal for environment protection and energy conservation, pelletizing machines like wood pellet mill and sawdust pellet machine develop rapidly in these years. The following content will discuss about the advantages of wood pellet making machine for you to take as references. For wood pellet mill, its main raw materials are waste sawdust and straws. The above two materials enjoy the common features of high output and urgent treatment.


Being regarded as constructional wastes and living wastes, the above two materials are the most commonly-seen by-products of furniture industry. If being directly discarded away, the above two materials will pollute the surrounded environment and waste a lot of renewable resources. Under such condition, it is necessary to produce an amazing machine with the ability to turn wastes into things of great value.

Wood pellet making machine is such an amazing machine. Wood pellet mill, also named as wood pellet machine, is mainly used to suppress those agricultural wastes into things of great value like fodders, etc. Besides, the finished products of wood pellet making machine can be directly used as new fuels for power plant. Your satisfaction is the endless pursuit of Doing Group.

www.chinamanufacturingmachine.com

Timber waste crusher

Timber waste crusher introduction :
This timber waste crusher is widely used in crushing various materials, such as pine wood, log, tree branch, waste wood and so on. These raw materials can be crushed into fine sawdust and powder by this machine at one time, the whole timber waste crush machine uses one motor, simple structure, and stable working condition. It is suitable for milling raw material like (tree branch, tree trimmings, cotton stalk, corn stalk, wheat straw etc) with size less than 50mm (diameter). After milled, the output size from timber waste crush machine can reach to 3-5mm (diameter) after milled, which is suitable for further pelletizing and briquetting.

Operating range of wood crusher for processing timber waste
Timber waste crush machine is a new type wood working machine, it can make the raw materials such as Wood, Wood chips, Wood block, Branch into sawdust and powder in one process. Machine can be installed on the cart or farm vehicle. Engine can be electromotor, diesel engine, gasoline engine, both of them are ok for working.

http://www.pelletmillmachines.com  

imber waste crusher introduction :
This timber waste crusher is widely used in crushing various materials, such as pine wood, log, tree branch, waste wood and so on. These raw materials can be crushed into fine sawdust and powder by this machine at one time, the whole timber waste crush machine uses one motor, simple structure, and stable working condition. It is suitable for milling raw material like (tree branch, tree trimmings, cotton stalk, corn stalk, wheat straw etc) with size less than 50mm (diameter). After milled, the output size from timber waste crush machine can reach to 3-5mm (diameter) after milled, which is suitable for further pelletizing and briquetting. - See more at: http://www.pelletmillmachines.com/machine/wood_machinery/Timber_waste_crusher_478.html#sthash.WirtSXFe.dpuf

imber waste crusher introduction :
This timber waste crusher is widely used in crushing various materials, such as pine wood, log, tree branch, waste wood and so on. These raw materials can be crushed into fine sawdust and powder by this machine at one time, the whole timber waste crush machine uses one motor, simple structure, and stable working condition. It is suitable for milling raw material like (tree branch, tree trimmings, cotton stalk, corn stalk, wheat straw etc) with size less than 50mm (diameter). After milled, the output size from timber waste crush machine can reach to 3-5mm (diameter) after milled, which is suitable for further pelletizing and briquetting. - See more at: http://www.pelletmillmachines.com/machine/wood_machinery/Timber_waste_crusher_478.html#sthash.WirtSXFe.dpuf

Wood shredder machine

Wood shredder machine

Raw material for wood shredder machine for processing timber waste :

1. It is suitable for preparing sawdust or biomass small grains for briquette press and dryer in the biomass briquetting plant. Wood shredder machine can crush raw wood into size of 3-5mm (diameter).
2. To ensure security, do not put the nails and other metal fragments into the wood shredder machine .

Raw material and final product from wood shredder machine

Features of wood shredder machine :

This wood shredder machine is based on the needs of industrial production in China, after years of research and design of the timber invented special equipment to smash series. As a result of rational design, compact structure, safety, durability, production efficiency, by promoting the use of, the result is good, only a whole set of equipment, motor drive, noise, simple structure, compact layout, the price cheap, stable, consumption less able to yield high quality wood products, low processing costs.

Technical parameters of wood shredder machine :

model	blade	Input size(mm)	Diameter (mm)	Size (mm)	Capacity (t/h)	Speed (r/min)	Power (kw)	Demision (mm)
DYPX-420	4	170*150	420	90*60*8	1	2600	7.5	1200*550*750
DYPX-500	4	200*170	500	120*70*8	1.2	2000	15	1500*640*820
DYPX-600	4	220*190	600	150*70*8	1.5	2000	18.5	1500*700*900
DYPX-700	4-6	230*190	610	150*70*8	1.8	2000	30	1850*830*1050

http://www.chinamanufacturingmachine.com

High output wood shaving machine

Wood shaving machine

Brief introduction of wood shaving machine :

The Wood Shaving Paring Machine, also called Wood Paring Machine, or Wood Flaker (Machine), includes rack, the platform on the rack, knife rest, cutters, diesel engine etc.

Wood shaving machine and final product

Application of wood shaving machine :

The of wood shaving machine is mainly used to shave timbers, wood logs, branches and plate edges into wood shavings. Wood shaving machine can be widely used for making shaving board/chipboard, raw materials of paper making industry, transport fillings for fragile things, and fillings for all kinds of animals, such as pigs, cows, cattle and sheep. It can also be used as biological energy source.

Wood shaving machine and final product

Working principle of wood shaving machine

1. Put the raw materials into the feeding hole;
2. Cut the materials by the cutters, and then put them into the pulverizing room;
3. Strike and crush them by the hammer and shear knife in high-speed revolution;
4. Send out the finished products through the screen by wind power;
5. The particles size can be adjusted by the size of the blades and mesh aperture.


Mobile: +86 155 155 38695
Email:elina@doinggroup.com
Skype:elina881130
What's app/Viber: +86 155 155 38695
Wechat: 155 155 38695

Wood waste shredder

Wood waste shredder

Introduction of wood waste shredder

Wood waste shredder can automaticly grind the wood into sawdust .Feed the materials inlet, first through blade, cut into grind room, mill under the impaction of high speed revolved hammer and reaction of blade cutting, though sieves wind power produced by inner wind leaves sent to outlet or outlay fan send to outlet.The size of finished material is determined by adjust the length of blade and the diameter size of sieve, so as to satisfy different requirement.

Wood waste shredder

Advantage of wood waste shredder
Wood waste shredder has a small size, little investment, much return, low energy consumption, high efficacy, easy usage and maintain and many advantage. Wood waste shredder for making sawdust is the perfect equipment that used to produce edible fungus and let you become rich. Wood waste shredder also can used to produce the raw materials of chipboard, sawdust board, density board and paper mill.   

Wood sawdust

Working principle of  wood waste shredder

Sawdust integrates crushing and grinding, adopting blade cutting and high speed  airflow impacting, and simultaneously complete micro material sorting process. During the blade working process, rotor produces high speed airflow, the material are accelerated in the airflow and impacted, thus completing the grinding process.


Mobile: +86 155 155 38695
Email:elina@doinggroup.com
Skype:elina881130
What's app/Viber: +86 155 155 38695
Wechat: 155 155 38695

Ring die wood pellet making machine

Introduction of ring die wood pellet making machine :
Ring Die Wood pellet making machine is mainly used for wood, straw, cotton stalk, rice husk, peanut shell, bamboo, empty fruit bunch, pulverized coal or waste paper, etc.

There are two kinds of wood pellet making machine: ring die & flat die.

Advantage of our ring die wood pellet making machine is structure closely, easy to use, run stably; Advantages of output pellets is high density, high fuel value, low moisture and low ash content.


Advantages of the Ring Die Wood Pellet Making Machine:
(1) The ring die wood pellet making machine has advantage of simple structure, easy operation, high automation, and less labor.

(2) High automation of ring die wood pellet making machine: 1-2 workers are enough to operate all the process.

(3) Our ring die wood pellet making machine with strong technical force, sound management system, and first-class sense of quality, it is possible for our Wood Pellet Machine to achieve maximum reducing of maintenance ratio during your machine operation.

(4)Our complete ring die wood pellet making machine mainly contains wood crush process, drying process, pellet making process, cooling process, packing process and waste air handing process,The final pellet has good quality and meet the European standard.


Our Services:
1. We treat customers as gods, and provide considerate services from shipment to maintenance, include professional free
training, guidance, installation,and debugging.
2. After sale, we provide 12 months warranty. we will help to solve any mechanical problems in time. Also engineers are available to service overseas